The Best Ice Auger Reviews and Definitive Guide

An auger is absolutely essential for ice fishing. You use it to drill clean holes through thick blocks of ice so you can get your line to the depths below. In other words, the best ice auger is your key to access the fish.

Buying augers for ice fishing can be tricky, especially for beginners. They have to choose from so many different models and may feel clueless about which brands and models will meet their needs. We understand your desire to find the right ice auger, and I’m here to help you with this review and buying guide.

 

My Top Pick

The Eskimo Hand Auger with Dual Flat Blades is a favorite of many anglers. You can buy it in three different sizes, and you’ll be happy with the quality of the hole it creates on ice. It’s lightweight and affordable, and you don’t have to worry about getting a back injury for too much bending.

 

Here are My Best Ice Auger Reviews:

  1. Eskimo Hand Auger with Dual Flat Blades — Best Ice Auger
  2. StrikeMaster Mora Hand Auger
  3. Eskimo Quantum Auger 
  4. Eskimo Propane Auger 
  5. StrikeMaster Lazer Auger
  6. Landworks Electric Ice Auger 
  7. Nils Master Cordless Drill Auger 

 

1. Eskimo Hand Auger with Dual Flat Blades — Best Ice Auger

Eskimo 6 Inch Hand Auger (HD06)

I like the Eskimo Hand Auger with Dual Flat Blades because it’s high-quality and affordable. It’s available in six, seven, and eight inches blade for a quick and efficient job. The sharp edges are perfect for cutting ice with minimal effort. I can extend it into three heights to cut the thick ice faster. 

This auger is also lightweight at seven pounds, which also makes it highly portable during long treks on the ice. It comes with a blade protector, but its quality isn’t up to par. I prefer this tool because I’m able to use my full strength without any worry of injury to my back. The handle is up to my chest, which is about the right height to keep me from hunching over while drilling.

 

Features

  • Manual
  • Sizes available: six, seven, and eight inches
  • Dual-flat blades
  • 5-year limited warranty

 

Pros

  • Better than screw-together hand augers
  • Prevents over-tightening when drilling
  • Quick and effortless drilling
  • Comes with blade protector to keep the edges sharp and long-lasting

 

Cons

  • Low-quality blade protector

 

If you’re searching for a wallet-friendly ice auger, you may like the Eskimo Hand Auger with Dual Flat Blades. It’s an entry-level tool that will make your drilling quick and effortless, especially during the early winter season. Its robust performance will surprise you, and you’ll find the pommel handle comfortable to use. 

Overall rating: 4.6

CHECK CURRENT PRICE

2. StrikeMaster Mora Hand Auger — Ultra-Sharp Blades!

StrikeMaster MD-8 Ice Fishing Mora Hand Auger, 8-Inch

The StrikeMaster Mora Hand Auger comes in four sizes, and each of them has high-alloy carbon steel blades. I can drill through the ice with ease because of the very sharp edges. Its powder-coated paint ensures minimal ice build-up within the tool. 

I like its adjustable handle because I can change the height depending on my needs. Its soft rubber grips offer ease of drilling and increased control. Its downside lies in its low-quality bolts that I have to change to ensure an efficient drilling experience.

 

Features

  • Manual
  • Size available: five, six, seven, and eight inches
  • High-alloy carbon steel blades
  • One-year limited warranty

 

Pros

  • Powder-coated paint
  • Soft rubber grips
  • Adjustable handle

 

Cons

  • Low-quality bolts

 

If you’re looking for a classic manual auger, you may opt for the StrikeMaster Mora. You can choose from its four sizes to meet your needs. Its carbon alloy steel blades ensure a clean cut without straining. They’re rust and corrosion resistant, so you’re getting a durable auger that requires minimal maintenance.

Overall rating: 4.6

CHECK CURRENT PRICE

3. Eskimo Quantum Auger — Anti-Vibration Handlebars!

Eskimo M43Q10 Mako 43cc with 10" Quantum Ice Auger

Aside from its affordability, the two-stroke Eskimo Quantum Auger has a classic design that any user can fix in case an issue arises. This 43cc ice tool is quick to start and comes with an extra-large recoil handle that doesn’t require me to remove my gloves. I like its anti-vibration handlebars, fingertip throttle control, and transparent gas tank. I can quickly check if I have enough fuel for ice drilling. 

I like to bring this energy-efficient auger on extended fishing trips because I don’t have to refuel often. The dual stainless steel blades provide optimal cutting power. Its drawback is that I have to tighten the screws before I begin drilling because they become loose quickly.

 

Features

  • Gas-powered
  • Sizes available: eight and ten inches
  • Stainless steel blades
  • Five-year warranty

 

Pros

  • Cold-weather tested
  • Suitable for re-drilling holes
  • Long-lasting blades
  • Maintains stability even when re-drilling or on uneven ice
  • Provides optimal gearing and precise power control
  • Absorbs vibration

 

Cons

  • Requires re-tightening of the screws

 

If you don’t want to exert much effort in drilling, you may want to try the Eskimo Quantum Auger. You can choose between the 8-inch and 10-inch blades depending on your requirements. Its high-performance Viper engine is effortless to operate, and you may replace the Quantum blades as needed. You won’t have any issues starting it even in the coldest weather.

Overall rating: 4.6

CHECK CURRENT PRICE

4. Eskimo Propane Auger — No Priming Required!

Eskimo High Compression HC40Q10 40cc Propane with 10-Inch Quantum Ice Auger

Propane has a higher octane rating, which means that the Eskimo Propane Ice Auger can cut through ice efficiently and quickly. This tool is low-maintenance and can equal its gas-powered counterpart in terms of performance. The high-compression engine provides plenty of energy to turn the blade. 

I find the easy-start feature impressive, and I’m happy that I don’t have to prime the engine before drilling. Its drawback is its low-quality plastic parts, which means I have to be careful in storing and using them so as not to chip them.

 

Features

  • Propane-powered
  • Sizes available: eight and ten inches
  • Stainless steel blades
  • Five-year limited warranty

 

Pros

  • High-compression 4-cycle engine
  • Suitable for re-drilling holes
  • Holds a 1lb propane cylinder
  • Doesn’t require priming the engine
  • Minimal maintenance
  • Low emissions

 

Cons

  • Low-quality plastic materials

 

If you’re searching for a lightweight propane-powered auger, you’ll find a goldmine in the Eskimo Propane Auger. Its robust 40cc four-cycle engine packs crucial torque and power. It’s efficient, durable, and environment friendly because it produces fewer emissions. The sharp blades can cut through the ice quickly.

Overall rating: 4.5

CHECK CURRENT PRICE

5. StrikeMaster Lazer Auger — Ergonomic Handle is Tops!

StrikeMaster Lazer Auger-6 in. LD-6

I like the StrikeMaster Lazer because of its adjustable handle for thick ice. It offers reliable performance in cutting thick ice because of its adjustable handle. It’s available in five sizes, but the seven and eight-inch models have a reinforced blade carriage for effortless drilling. 

I prefer its powder-coated paint because it reduces the possibility of ice build-up on the edges. The rubber grips are soft, and the ergonomic handle reduces fatigue. It comes with a China-made blade, which can dull quickly; but, I replaced mine with one that’s Sweden-made. 

 

Features

  • Manual
  • Sizes available: four, five, six, seven, and eight inches
  • Chrome alloy stainless steel blades
  • One-year limited warranty

 

Pros

  • Quick and efficient ice cutting
  • Replaceable blades
  • Adjustable length

 

Cons

  • Low-quality China-made blades 

 

If you’re searching for the best ice fishing auger, you may opt for the StrikeMaster Lazer because it’s twice more efficient than its competitors. It’s suitable when you have to hike long distances to go ice fishing. It’s highly portable and lightweight, and you won’t have issues with fatigue. Because it’s a manual auger, you don’t have to worry about engine breakdown or carrying fuel or extra batteries on your trips.

Overall rating: 4.6

CHECK CURRENT PRICE

6. Landworks Electric Ice Auger — Protects Against Overheating!

StrikeMaster Lazer Auger-6 in. LD-6

I like the Landworks Electric Ice Auger because it’s an efficient tool in drilling through ice. I bring it every time I go ice fishing, and I’m happy with the powerhead performance. It doesn’t emit any smog and noise, and it’s safe to use and eco-friendly. Its overload protector protects the powerhead from overheating. The evenly-spaced handles improve balance during drilling holes. 

The brushless motor with a three planetary gear mechanism ensures better efficiency. I’m able to drill as many as 30 holes in a single charge using the 2Ah battery. I use the 4Ah lithium-ion battery I bought separately to drill up to 60 holes. 

The ergonomic handles reduce stress on the arms and wrists. In the case of tripping and falling, the safety button is within reach. I notice it often trips before hitting the water, but I found a quick solution. I have to start it again, put it on the reverse, and then re-drill.

 

Features

  • 2Ah lithium-ion battery
  • Size available: eight and ten inches
  • Carbon-coated steel blades
  • Reverse function
  • Optional: 4Ah lithium-ion battery

 

Pros

  • Overload protector
  • Wide-spaced handles
  • High-transmission efficiency

 

Cons

  • May stall before hitting the water

 

If you don’t want a hand auger, you may opt for the Landworks Electric Ice Auger. You won’t have any issues about powering it up and overheating. You may also like that it’s eco-friendly, safe to use, and has wide-spaced handles for optimal balance. The three Planetary Gear Mechanism ensures higher transmission efficiency. Its brushless motor offers better performance than its competitors.

Overall rating: 4.3

CHECK CURRENT PRICE

7. Nils Master Cordless Drill Auger — Works with Your Favorite Half-Inch Cordless Drill!

Nils master UR600C Cordless drill auger

As an ice fishing enthusiast, I want to be able to attach a cordless drill to a manual auger. After scouring the Internet, I discovered Nils Master Cordless Drill Auger. I like its unique design because it’s suitable for beginners and seasoned anglers. It’s reliable and high-quality, and it won’t break the bank. The chrome-plated steel blades can cut through thick ice quickly and effortlessly. The shaver style blades are efficient, and I’m able to dig holes without too much pressure.

This auger can fit well with a half-inch cordless drill, and it performs efficiently. My sole concern is that it’s quite hefty at 9 pounds. If I’m to drill more holes, I’m sure I’ll find it tiring. I may not have the energy to do the actual fishing. Nevertheless, heavier augers are more efficient and reliable.

 

Features

  • Manual
  • Suitable for use with a half-inch cordless drill (not included)
  • Sizes available: four and a half, six and eight inches
  • Chrome-plated steel blades
  • Two-year limited warranty

 

Pros

  • Versatile and convertible
  • Fast and sharp drilling
  • Replaceable blades
  • Durable

 

Cons

  • Low-quality blade cover

 

If you want a high-quality, top-rated ice auger that suits your reliable cordless drill, you may wish to try the Nils Master Cordless Drill Auger. You’ll like its versatility because you can attach it to your drilling tool or use it alone. The blades are sharp for quick and easy cutting through ice. 

Overall rating: 4.7

CHECK CURRENT PRICE

best ice auger review

 

Things to Consider When Buying Ice Augers

Augers are at their best if you’re able to choose one that meets your requirements. You have to ensure that you know what your needs are before you make a decision. Let this buying guide help you.

 

Power Source

You can choose any of these four kinds: manual, gas, propane, and electricity.

 

Manual

A manual auger is affordable, works quietly, lightweight, portable, and no machine to prime before drilling. Nevertheless, it’s tiring to operate one because you’re using your energy to cut through the ice. You won’t have any problem if you’re in tip-top shape, but if you need to cut several holes, fatigue can set in.

If you have a cordless drill, you can use it to power your manual auger.

Many ice anglers prefer the convertible type, especially if they have to drill a dozen holes. You may have to pay more for it, but it’s cheaper than gas, propane, or electric augers.

 

Gas

Gas-powered augers have long bits, which are essential if you have to drill through thick ice. They’re durable and long-lasting if you choose a high-quality motor. You need fuel to get the tool going, and they produce the loudest noise. If you spill fuel, fish may swim away from the hole.

 

Electric

Electric augers have less torque, but they’re not as expensive as their propane or gas counterparts. They’re suitable if you’ll be drilling up to two holes and if you’re drilling inside a tent or fishing cabin.

They don’t produce harmful fumes and don’t need oil to operate. However, you may need extra batteries on extended fishing trips.

 

Propane

Propane augers are also lightweight and burn cleanly. They’re also suitable for indoor drilling, and you’ll find it quick and straightforward to use because you can buy pre-filled propane tanks.

 

Blade Type

Ice augers often have manufacturer-specific blade types, which means you can’t swap out one model for another. The choice of blade type depends on the personal preference of the user. 

 

Shaving Blade

A shaving blade has a smooth but razor-sharp edge. It can remove a thin layer of ice for every pass, but it melts the ice quickly. If you’re buying this type, you can use it if you have to cut many new holes immediately. It’s not ideal for re-opening old gaps and dirty ice because it will dull rapidly. Dull shaver blades can no longer cut ice efficiently.

 

Chipper Blade

A chipper blade has a wide-set of sharp teeth for quick chewing through the ice. It doesn’t have the speed or precision of its shaving counterpart, but it can handle wear and tear caused by cutting through dirty ice with sand.

It takes more time to cut pristine ice, and it leaves rough edges on the hole.

 

Blade Size

You can buy blades in different sizes, but for many auger types, you can opt for a six, eight, or ten-inch diameter. Some manual models offer 4-inch blades, which are useful if you’re catching small fish.

If you want to snare large fishes, you have to opt for an eight or ten-inch edge. For smaller species, a 6-inch blade will suffice.

 

Blade Quality

You also have to consider the sharpness and quality of the blades, which have to be robust enough to withstand wear and tear. They have to hold a sharp edge, but you can buy after-market blades when necessary.

 

Weight

In choosing the best ice auger for the money, mobility is essential. Ice anglers have to dig another hole if they’re fishing in an unproductive one. They prefer light augers, but if you’re ice fishing in a fish house, you don’t have to consider weight.

 

Length

It’s also crucial to think about the length of the auger when buying a new one. You don’t have to bring an extended auger if you’re only cutting through 10-inch ice. You have to consider fishing habits and location. For instance, if you fish in the Northeastern United States during the early winter, you don’t need a long auger. You’ll be drilling through at most a foot of ice.

However, if you fish during the late winter on a lake in Alaska, you have to drill through ice that’s about five feet thick. You may opt for a modest-sized auger if you don’t fish on exceptionally thick ice often. You can add an extension if you have to drill through thick ice, as needed.

You may opt for an auger with an adjustable height for quick adjustments for thicker ice. It ensures that the handles remain at a comfortable height. You can start digging holes faster if the handles are at the right level. You also reduce arm fatigue if you’re drilling many holes.

 

Conclusion

Buying an ice auger doesn’t have to be cumbersome if you know what you need. You can choose from top rated ice augers that I’ve reviewed. There’s sure to be one that fits your requirements and budget.

You can opt for the Eskimo Hand Auger with Dual Flat Blades if you’re looking for an entry-level ice auger that won’t break the bank. You’ll be drilling your holes in no time without worries of back injuries from too much hunching.

 

Share on facebook
Share on twitter
Share on pinterest
Share on print
Share on email
Share on whatsapp
top