Last Updated on July 26, 2022 by Donnell Henderson
Many people feel confused about mounting the fish finder to the trolling motors, which is quite popular these days for baitfish. It can be a challenging task but comes with multiple benefits and more options as well. The succeeding technology is making fishers’ life convenient and networking trolling motor to the fish finder is one of them. If done correctly, it can provide you with many valuable features like side scan, bottom terrain imaging and more.
Moreover, networking relies not only on correct mounting but also on a good investment. If you want to be one of the best bass anglers, it’s time to spend on quality networking equipment first. It will also help you in the mounting process depending on your settings.
Table of Contents
- Reasons to Mount the Transducer to the Trolling Motor
- How to Connect a Fish Finder to Your Trolling Motor
- Some Useful Tips
- Final Words
Reasons to Mount the Transducer to the Trolling Motor
Mounting a fish finder to trolling motors can be complicated because there are lots of different fish finder models. It’s vital to look for proper guidance and, before that, know why bass anglers should do this.
So let’s look at some reasons for trolling motor transducer mount.
- When you are bass fishing at the front of the boat to find more bass but want to have details, side scan, and images of the underneath, connecting the transducer with a bow mount trolling motor makes a difference.
- If you are busy targeting the structure with more fish, a forward-facing sonar will automatically point in the forward direction when connected with a bow mount trolling motor. It is pretty helpful at this point to know about the presence of fish, especially bass.
- You can catch fish easily while bass fishing with the help of these networking investments. Getting bass is not a cup of tea, therefore, you need beneficial support.
The additional information, proper sound waves, and navigation features depending on your settings will make fish finding easier for you by targeting the appropriate structure.
How to Connect a Fish Finder to Your Trolling Motor
The only thing that may bother you as a fisherman is the complex cabling during mounting for the search for fish. But again, if done appropriately, you will not face any issues while fishing.
It is the reason why learning about techniques of mounting the transducer to the trolling motor is essential. But before we dive into the steps of mounting the transducer to the trolling motor, you must know about an excellent trolling motor mount. Without it, you won’t be able to catch bass, especially in-depth adjustment.
For accurate readings and efficient results of bass fishing, a compatible mount that goes well with both a transducer and a trolling motor is a must. Once you get the suitable one, you can connect the fish finder to the trolling motor. The below-mentioned steps are to help you in connecting the transducer directly to the trolling motor.
1. Begin with attaching the trolling motor mount with a transducer
Adjust the angle and start attaching the mount to the transducer with the help of hardware included in the mount. Make sure to tighten all the screws, so you don’t face inconvenience while going deep or away from the shore.
2. Slotting the hose clamp
Now pass the trolling motor housing clamp through the mount to make the length of both sides equal. The hose clamp is usually included with a fish mount settings kit.
3. Positioning the mount to the motor
Keeping the transducer’s narrower end away from the propeller is essential. Place the mount between the propeller and the fin to avoid damage. Once the transducer mount is placed under the motor, you are almost done with positioning.
4. Attaching the mount
Now when you are done with the positioning, it’s time to attach the clamped hose first. For this, you need to hold the fish transducer against the motor body. After fixing the hose clamp around the motor, use a screwdriver for tightening. Right positioning is important for baiting more lures.
5. Working on cables
Well, this is one of the most crucial steps. Damage to the transducer cable is not favorable, especially while fishing away from the shore. Therefore, it is important to secure them during the mounting procedure to prevent further problems. You can have transducer cable ties included in the mounting kit, or else make sure to buy the best ones.
The cable from the transducer should be secured through the length of the trolling motor shaft. Make sure it is away from the propeller and other damaging areas. When you are done with it, connect the cable to your fish finder to start seeing images.
And there you go. You are done with the mounting procedure of the transducer to the electric trolling motors and the fish finders.
Some Useful Tips
Now that you have knowledge about the mounting of the transducer to the trolling motor, you must also know some tips and tricks; here are some tips for your help:
- Never forget to secure the hose clamp with a cable tie. It is beneficial for you to prevent damage and underwater crushing to the stainless steel hose clamp when going deep.
- Prefer a puck transducer to fit the motor better and enhance the functioning as puck transducers are specifically designed for this purpose.
- If you are facing interference during the bass search, don’t worry; try unplugging the sonar, it might be a sign of radiation. If the interference goes away, it means you were experiencing radiation interference during fish finding. Whereas if it doesn’t disappear, it might be a power line issue.
- Work carefully and wisely when routing the cable, especially if you own a foot control trolling motor for your fishing boat.
- There are different types of transducers. Visit multiple shops and online stores to choose your required one for enhanced effectiveness. But be aware of the difference in the position depending on the transducer type for the quality of those services.
- A standard transducer should be angled downward for deep bass finding. The advantage to such down imaging and side imaging technology is that the downward angling prevents sonar beam obstruction.
- For forward-looking fish finders, connect the transducer to the side of the shaft. It can also be moved downward when needed for finding the desired species like bass.
- The best thing for bass pros is that you can attach even two transducers to the trolling motor to catch more fish. Installing more than one transducer provides you with accuracy and more coverage around your fishing boat to keep an eye on every fish.
- If you mount a forward-looking and a standard transducer to the trolling motor for hard bottom targeting, make sure they are angled differently to catch more bass. Else you will be challenged by the sonar interference.
- Paying attention to transducers, fish finders, and the transducer mount before you start with the sonar unit is vital for proper brass finding.
Controlling everything underwater to bait fish of your choice with a touch on a screen of fish finders is exciting and convenient but challenging at the same time. If the mounting and the settings are done correctly, you are all set to do wonders in the lake and rivers. Don’t forget to invest in good networking electronic stuff for enhanced functioning and bass-finding accuracy. You don’t always have to drill your boat for a better fish-catching experience when you have compatible transducers, mounts, fish finders, and trolling motors to find fish, especially bass.